30-06 Springfield Collet / Neck Sizing Die 90960

Collet Neck Sizing Die Instructions and load data specific to the 308 Winchester Rifle Cartridge New flat two die box with air tight cover There is no loading system that will load more accurate ammunition than Lee Collet Dies. Lee guarantees it in writing with every set. No one but Lee has ever dared to make a guarantee like this "Smallest group size or your money back." A collet squeezes the case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies. Maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. This provides the shot start pressure normally supplied by the crimp. A dead length bullet seater is recommended to complete the most accurate reloading system ever made. This die sizes only the neck to preserve the perfect fit of fire forming. Only reload cases that have been fired in your gun when using a collet die. Not recommended for autoloaders, slide or lever action guns. This die is designed for assembling the most accurate ammunition, but is not recommended for hunting rounds as the case is neck sized only and the bullet is not crimped in case.